WEE VAC       with 40 gallon steel tank

          Specs:  The WEE VAC is used to pump out under the sink grease traps.  This is a low cost way of getting into the under the sink traps.  The unit comes with the Vac Unit mounted on a steel drum, heavy duty 2 wheeled cart, and 10 foot of 1 1/2"vac hose with a stinger. 

• We have modified the lid of the vac unit with the proper hose fittings for the 1 1/2" hose , and a 3" camlock and pipe that goes to the bottom of the barrel.  This is where you hook your 3" hose from your truck up, and suck out the contents from your barrel.  Note:  This unit only has vacuum, no pressure.  It must be vacuumed out of the barrel.

• "Types of projects it's good for"   We not only build trucks, but we also have built two trucks that we pump with also.  We pump a lot of grease traps, and got tired of trying to drag a 3" hose through a restaurant to pump out the "under the sink traps".  We built a spot on our truck for the unit, and pump out many undersink type traps.   We go down in the basement on some restaurants, and upstairs for others.  Most of our customers have built or bought a hauler that slides into your Reese receiver, to haul it around.  We have used one for the last five years, and have had great luck with it.  We have other customers that use it to pump out remote outhouses.  I don't know how that works.

• "Ease of use"  These units are very simple to use.  Unwind cord, plug into 120volt receptacle, turn switch on, use stinger to scrape walls of grease trap, while you suck out all the solids and liquids.  Hook a 3" hose to the lid, and suck out the contents. 

• 30 day Limited Warranty

• DIMENSIONAL INFORMATION

  "Weight"   ~125 lbs

   "Dimensions"  The wheels are the widest point, 28" wide.  We made it narrow enough to fit though a 32" door.

                          The barrel is ~35" tall.

                          The top of the handle of the two wheeled cart is the tallest point at ~52"

  PRICE $1,240.00 plus freight.